Centre for Outreach and Digital Education (CODE), IIT Madras, offers a short-term executive certificate programme on Motors and Controllers. The performance of an electric vehicle is primarily defined by its
“engine” – the motor. Although motors have been known for over a century, EVs make far more exacting demands that have brought motors to the centre-stage of technology and set new benchmarks. All
of these advances are driven by developments in power electronics and embedded firmware.
Most students and professional engineers in the automotive industry are bewildered by these rapid advances and unable to make informed decisions on the kind of motor that would be appropriate for
a vehicle. This course seeks to demystify the “Multi-physics” of the motor and make the underlying ideas accessible. Spanning electromagnetic, thermal, hardware design and control algorithms, this course bridges the gap between academic theory and industry practice. The learners will be empowered to develop motors for vehicles of their choice through a specially curated software tool for design and simulation.
Mode of Course: 28 hours of recorded videos and 18 hours of online live interactive sessions with the faculty
Modules Covered:
Module 1 : Recap of High School Physics
Module 2: Motor Construction
Module 3 : Performance Evaluation
Module 4 : Motor Control
Module 5 : Vehicle Dynamics
Module 6: Motor Design
Module 7 : Controller Design
Module 8: Engineering Considerations
Module 9: Contemporary Trends
Click on the tab “Module Description” and choose the appropriate module from the dropdown menu to view more information about each module.
Course Start Date:November 1, 2024
Mode: Pre recorded Videos will be released on Fridays and Online Live session on Saturdays.
Last date of Registration: October 20, 2024
Profile of the Instructor
Mr. L. Kannan
Technology Director,
Centre of Excellence in Energy and Telecommunications (CEET), IIT Madras
Mr. L. Kannan has built motors and controllers for several applications including electric vehicles, industrial machines, power tools and domestic appliances. He approaches design from first principles, examining the interactions of different physics phenomena that impact the final performance, to develop solutions that are tailored for the target end-use. His lectures on this topic are popular among students,
faculty and industry professionals.
Module Description
MODULE – 1 : Recap of High School Physics
Module Description:
Fundamentals of physics underlying a motor
Concepts Covered:
Ohm’s Law, Magnetism, Thermal, Potential Divider, Three-Phase Circuits, Real and Apparent
power, Faraday’s law of electromagnetism, Torque and Speed Constants, Geometry-Free
Visualization of Ohm’s and Electromagnetism, Electrical, Mechanical and Magnetic Loading of
a motor
Learning Outcomes:
Physics of torque production.
Back-emf constant, torque constant and the relationship between them
Applications of the Module:
Motor sizing based on torque density
MODULE – 2 : Motor Constructions
Description of the Course:
Different components and geometrical features inside a motor
Concepts Covered:
Physical Construction of a motor, Magnetic Path in a motor, Motor Sizing, winding pattern,
Effect of pole pairs
Learning Outcomes:
Optimizing the geometry of a motor for torque production
Applications of the Module:
Design and sizing of internal features of a motor
MODULE 3 : Performance Evaluation
Description of this Module:
• Assessing the performance of a motor using torque and speed curves
• Impact of losses on temperature, efficiency
Concepts Covered :
• Torque-Speed and Power-Speed Curves, Phase Resistance, Rated Operating Point,
Conductive and Convective Temperature-rise, Efficiency, Motor Constant, Copper and Steel
losses
• Effect of gearing
Learning Outcomes:
Estimation of losses, efficiency and thermal effects
Applications of the Module :
Evaluating how well the motor performs under different conditions of torque and speed
MODULE 4 : Motor Control
Description of this Module:
Closed-loop control for optimal control of speed and torque
Concepts Covered :
• Magnetic and reluctance torque, impact of phase-advance angle
• MTPA, and flux-weakening control schema.
• Feedback control Mechanism and Control Loops
Learning Outcomes:
Optimizing motor performance by controlling the phase-advance angle
Applications of the Module :
Fundamentals of Closed-loop control of a motor
MODULE 5 : Vehicle Dynamics
Description of this Module:
How does different vehicle parameters and driving conditions influence torque and speed
requirement of an EV motor
Concepts Covered :
Linear and Rotational Motion, Powertrains, Drive modes, Forces Acting on the vehicle, Velocity
vs Time and Distance vs Time, Vehicle Dynamics Calculator
Learning Outcomes:
Estimating the speed, torque and power demands on the motor under different driving
conditions
Applications of the Module :
Deriving the specifications of the motor, based vehicle performance requirements
MODULE 6 : Motor Design
Description of this Module:
• Overview of motor topologies
• Motor design and simulation tool
Concepts Covered :
Motor design for a popular topology, using a cloud-hosted design and simulation tool
Learning Outcomes:
Design of a motor and its performance analysis
Applications of the Module :
Detailed motor design developed on the basis of vehicle specifications
MODULE 7 : Controller Design
Description of this Module:
Hardware and software design to implement closed-loop control of motor
Concepts Covered :
• PWM, hex-bridge inverter, Controller architecture, current and voltage measurement,
hardware and software filters, 6-step control, Field-oriented Control
• Firmware implementation – Clark and Park Transforms, Third Harmonic Injection, SVPWM
Learning Outcomes:
Design of a motor and its performance analysis
Applications of the Module :
Identify the components of interest for the development of controllers for a PMSM motor
control
MODULE 8 : Engineering Considerations
Description of this Module:
How to build a motor that meets user expectations of performance and life
Concepts Covered :
Noise and Vibration, Ingress Protection, cogging torque and torque ripple, thermal design
guidelines, Wavy washers contact resistance
Learning Outcomes:
Practical considerations and good practices in motor manufacturing
Applications of the Module :
Manufacturing guidelines for high-performance motors
MODULE 9 : Conntemporary Trends
Description of this Module:
Contemporary challenges and design trends in the EV industry
Concepts Covered :
Tech Drivers, constraints of Materials and Manufacturing, Design Trends
Learning Outcomes:
Roadmap for designs that enable strong market differentiation
Applications of the Module :
Visualizing the future evolution of this domain
Eligibility & Fees
Eligibility:
B.Tech (any domain) with interest in Automotive EVs
Course fees:
Rs. 47,200 (Rs. 40,000 + 18% GST)
Register before 31st August to avail an Early bird discount
Rs. 35,400 (Rs. 30,000 + 18% GST)
Course Policy
Please refer HERE to read about policies on Admission, Pricing, Payment and Attendance.
Certification
The Certificate criteria for this course is as follows:
Total % will be calculated from all 3 categories
( Assignments, Quizzes and Attendance of Live sessions)
Reviews
There are no reviews yet.