Microprocessors And Microcontrollers

3,000.00

 

Prof. Santanu Chattopadhyay

IIT Kharagpur

*Additional GST and optional Exam fee are applicable.

SKU: IIT Kharagpur Category:

Description

 

Microprocessors are used extensively in the design of any computing facility. It contains units to carry out arithmetic and logic calculations, fast storage in terms of registers and associated control logic to get instructions from memory and execute them. A number of devices can be interfaced with them to develop a complete system application. On the other hand, microcontrollers are single chip computers, integrating processor, memory and other peripheral modules into a single System-on-Chip (SoC). Apart from input-output ports, the peripherals often include timers, data converters, communication modules, and so on. The single chip solution makes the footprint of the computational element small in the overall system package, eliminating the necessity of additional chips on board. However, there exists a large range of such products. While the simpler microcontrollers are cheap, their capabilities (in terms of program size and analog and digital peripherals) are also limited. Such processors may be suitable for small applications. Microcontrollers like 8051, PIC belong to this category. On the other hand, advanced microcontrollers are often much more powerful, comparable to the very advanced microprocessors. The AVR and ARM processors are of this category.

This course will start with a discussion on a simple microprocessor, 8085. Understanding this architecture is the basis to follow any other complex CPU architecture. It will be followed by a complete overview of a range of microcontrollers covering 8051, PIC, AVR and ARM. The hardware intricacies of these processors and their programming will be covered. Different system design examples built around these processors will also be elaborated.

INTENDED AUDIENCE

CSE, ECE, EE

PRE-REQUISITES  

Digital Design, Digital Logic

INDUSTRY SUPPORT 

Companies involved in development of microprocessor and microcontroller based products

ABOUT THE INSTRUCTOR

Prof . Santanu Chattopadhyay received his BE degree in Computer Science and Technology from Calcutta University (B.E. College) in 1990. He received M.Tech in Computer and Information Technology and PhD in Computer Science and Engineering from Indian Institute of Technology Kharagpur in 1992 and 1996, respectively. He is currently a Professor in the Department of Electronics and Electrical Communication Engineering, IIT Kharagpur. Prior to this, he had been a faculty member in the IIEST Sibpur and IIT Guwahati in the departments of Computer Science and Engineering. In both these places he has taught the subject of Compiler Design several times. His research interests include Digital Design, Embedded Systems, System-on-Chip (SoC) and Network-on-Chip (NoC) Design and Test, Power- and Thermal-aware Testing of VLSI Circuits and Systems. He has published more than 150 papers in reputed international journals and conferences. He has published several text and reference books on Compiler Design, Embedded Systems and other related areas. He is a senior member of the IEEE and an Associate Editor of IET Circuits Devices and Systems journal.

Certification Process

1. Join the course
Learners may pay the applicable fees and enrol to a course on offer in the portal and get access to all of its contents including assignments. Validity of enrolment, which includes access to the videos and other learning material and attempting the assignments, will be mentioned on the course. Learner has to complete the assignments and get the minimum required marks to be eligible for the certification exam within this period.

COURSE ENROLMENT FEE: The Fee for Enrolment is Rs. 3000 + GST

2. Watch Videos+Submit Assignments
After enrolling, learners can watch lectures and learn and follow it up with attempting/answering the assignments given.

3. Get qualified to register for exams
A learner can earn a certificate in the self paced course only by appearing for the online remote proctored exam and to register for this, the learner should get minimum required marks in the assignments as given below:

CRITERIA TO GET A CERTIFICATE
Assignment score = Score more than 50% in at least 9/12 assignments.
Exam score = 50% of the proctored certification exam score out of 100
Only the e-certificate will be made available. Hard copies will not be dispatched.”

4. Register for exams
The certification exam is conducted online with remote proctoring. Once a learner has become eligible to register for the certification exam, they can choose a slot convenient to them from what is available and pay the exam fee. Schedule of available slot dates/timings for these remote-proctored online examinations will be published and made available to the learners.

EXAM FEE: The remote proctoring exam is optional for a fee of Rs.1500 + GST. An additional fee of Rs.1500 will apply for a non-standard time slot.

5. Results and Certification
After the exam, based on the certification criteria of the course, results will be declared and learners will be notified of the same. A link to download the e-certificate will be shared with learners who pass the certification exam.

CERTIFICATE TEMPLATE

Course Details

Week 1: Introduction: General processor architecture, Microprocessors, Microcontrollers 
Week 2: 8085 – Part I
Week 3: 8085 – Part II 
Week 4: 8085 – Part III 
Week 5: 8085 – Part IV 
Week 6: 8051 – Part I 
Week 7: 8051 – Part II 
Week 8: PIC, AVR 
Week 9: ARM – Part I 
Week 10:ARM – Part II 
Week 11:Interfacing examples – Part I 
Week 12: Interfacing examples – Part II 

Books and References

1. R. Gaonkar, “Microprocessor Architecture, Programming and Applications with the 8085”, Prentice Hall, 2014.
2. M.A. Mazidi, R.D. McKinlay, J.G. Mazidi, “The 8051 Microcontroller: A Systems Approach”, Pearson, 2013.
3. M.Bates, “PIC Microcontrollers”, Newnes, 2011.
4. M.A. Mazidi, S. Naimi, S. Naimi, “The AVR Microcontroller and Embedded Systems: Using Assembly and C”, Prentice Hall, 2011.
5. W.A. Smith, “ARM Microcontroller Interfacing: Hardware and Software, Eketor, 2010.

Reviews

There are no reviews yet.

Be the first to review “Microprocessors And Microcontrollers”